Development

Bankstown Airport Polair Major Development Plan (MDP)

In compliance with Section 96 of the Airports Act 1996, Bankstown Airport Limited advises that the Federal Minister for Infrastructure and Transport approved the NSW Police Air Wing Facility Major Development Plan (Polair MDP) at Bankstown Airport.

Bankstown Airport Polair MDP Contents and Executive Summary

Bankstown Airport Polair MDP Chapters 1-4

Bankstown Airport Polair MDP Chapters 5-7

Bankstown Airport Polair MDP Chapters 8-9

Bankstown Airport Polair MDP 10-12

Bankstown Airport Polair MDP Appendices

Development

Airport Lessee Company (ALC) Consent to a Building Activity Application

Applications must be made to Sydney Metro Airports for all building & construction work to be undertaken anywhere on the Airports. This includes all new building works and all renovation of existing facilities for all property on the Airports.

The applicant must also provide to BAL a copy of their application, along with the supporting proposal documents as well as the completed ALC Consent Forms 1 of 3, 2 of 3 and 3 of 3 which are available below.

Please contact our development team at development@bankstownairport.com.au or (02) 8709 9400 for any queries.

Sydney Metro Airport Lessee Company Consent Forms
Fees

Building Activity Application to the Airport Building Controller (ABC)

Building Activity Applications are required by the Airport Building Controller (ABC) for any building/construction works, earthworks, demolition works, civil works, services works or change of building use (classification) on the Airport. The ABC contacts are:

Complete the relevant Application from the Building Activity Application Forms available below:

  • Application for Building Permit (for construction of any building or structure)
  • Application for Works Permit (for earthworks, civil works, electrical works or hydraulic works)
  • Application for Demolition Authorisation (for demolition of existing structures)
  • Application for Certificate of Compliance Occupancy/Use (for change of building classification, no building works

Where it is proposed to change the building classification but there are no building works, you should contact the ABC to determine the relevant approval requirements.

ABC Application Forms

Development Guidelines

For information on an Airport Lessee Company (“ALC”) Consent to a Building Activity application at Sydney Metro Airports Bankstown the Airport Lessee Company Consent Guide for Applicants provides the step by step guide to the ALC Consent process for Bankstown Airport Limited (BAL).

A Building Activity application is required to be lodged with the Airport Building Controller (ABC) – refer to this section below.

The applicant must also provide to BAL a copy of their application, along with the supporting proposal documents as well as the completed ALC Consent Forms 1 of 3, 2 of 3 and 3 of 3 which are available below.

The proposal and covering forms for ALC consent should be lodged at

Bankstown Airport Management Centre,

3 Avro Street, Bankstown Airport.

Register

Current Developments

This section details our current developments under consideration, as well as development/proposals to which ALC Consent has been provided.

Current Development Register

For further information, please contact our Development Assessment
Team on (02) 8709 9400 or development@bankstownairport.com.au

Design & Construct

For more information on the development opportunities at Sydney Metro Airports Bankstown and Camden, please contact our Property Management department on 02 8709 9400

Further Information

Airport Lessee Company Consent Policy 2014

Urban Design Guidelines July 2015

Contractors Handbook 30 June 2015

2017 BAL-CAL Standard Construction EMP guideline March 2017

Off Airport Height Assessment

Assessment and administration charges for all building and crane assessments relating to the Building Control Regulations or the Airport Obstacle Limitation Surface for Bankstown and Camden Airports are as follows:

Height Assessment Charges 2017

Requirements for height assessment applications are as follows:

Development Application Assessment Data Requirements

Full written description of proposed development characteristics and site details.

Development site located by:

  • street names bordering site; or
  • co-ordinates of site boundary in MGA 94 survey grid format; or
  • co-ordinates of centre of site in MGA 94 survey grid format with block area details in sqm.

Development height detailed by:

  • elevation characteristics (height above ground in metres or RL (AHD)) of development proposal including any post construction additions such as aerials, spires, towers, etc.
  • reduced levels (RLs) relative to Australian Height Datum (AHD) over entire site at grid separation of 5m; or
  • contours over entire site at maximum interval of 0.5m.
Temporary Structure Application Assessment Data Requirements

Full written description of proposed equipment/structure to be erected and purpose of application.

Location of temporary structure by:

  • street names bordering site; or
  • co-ordinates of site boundary in MGA 94 survey grid format
  • co-ordinates of centre of site in MGA 94 survey grid format with block area details in sq m.
  • full height capabilities of temporary structure/ equipment, including base structure and boom height if applicable.

Temporary structure height detailed by:

  • full height capabilities of temporary structure/equipment, including base structure and boom height if applicable.
  • reduced levels (RLs) relative to Australian Height Datum (AHD) over entire site at grid separation of 5m; or contours over entire site at maximum interval of 0.5m.

Crane Form

For further details on your specific off airport height enquiry please contact our office on (02) 8709 9400